Today's Hard|Forum Post
Today's Hard|Forum Post

SilverStone Argon Series AR07 CPU Air Cooler Review

The Argon Series AR07 CPU air cooler is billed by Silverstone as being, "For users looking for a no-nonsense top performing cooler without the premium price, the Argon AR07 is the perfect choice." Three heatpipes, some fins, and a 140mm fan is no-nonsense in our book, so how does it cool?

Introduction

Silverstone has been on a roll as of late releasing cooler after cooler. Whether it be a hybrid AIO or a tower based air cooler or even a slim top down cooler. Today SilverStone is here to keep the ball rolling with their newest air cooler the Argon Series AR07. This is what SilverStone has to say about the AR07:

The Argon series coolers are designed to provide the best cooling solution for your CPU. Featuring three 8mm thick copper heat pipes connected to the base using heat-pipe direct contact (HDC) technology, this cooler retains the signature Argon series feature. To improve performance even further, unique and exclusive heatsink fin designs such as interweaving diamond edge and arrow guides are included. Coupled with an all-new 140mm PWM fan with exceptional airflow to noise ratio, the AR07 can quickly and quietly push away excessive CPU heat while also cooling down surrounding motherboard components for effective overall thermal dissipation. For users looking for a no-nonsense top performing cooler without the premium price, the Argon AR07 is the perfect choice.

Article Image

System Setup

Today's review takes place on our fourth generation [H]ard platform. The test bed consists of the ASUS Z87-Deluxe motherboard, eight gigabytes of Corsair 1600 MHz DDR3 RAM and the Intel Core i7-4770K.

Article Image

Test Methods

CPU

The biggest change you will notice is the removal of hardware testing. In recent years, Intel has shifted its methods of testing to software based and so we find it acceptable to do the same.

GPU

Once again we have an integrated GPU in our processor which alleviates the need for a discrete one. With the removal of a discrete GPU comes the advantage of not having an additional variable to account for.

The iGPU will not create any anomalies in our testing as long as we practice consistent testing methods.

Case

Corsair was kind enough to provide us with its Carbide series chassis. It provides excellent airflow and interior space and is a good reflection on current case design.

Thermal Paste

Noctua\\'s NT-H1 thermal paste was selected as the thermal interface material (TIM) of choice for a few key reasons. The thermal paste has been shown to provide excellent thermal conductivity allowing the heat sinks to better do its job. There is no observed curing time. That is, performance does not get any better over time. Any curing time could have introduced variables into the equation causing at best dubious results and at worst unreliable ones.

Temperatures

Ambient temperature will be kept at 25C for the duration of the tests and measured with a MicroTemp EXP non-contact infrared thermometer and cross referenced with the Sperry Digital 4 Point thermometer. Any variance greater then 0.2C will halt the testing until temperatures return within spec for fifteen minutes.

Idle

Idle temperatures will be recorded after a twenty minute period of inactivity. Any fluctuation during the last sixty seconds will reset the timer for an additional five minutes.

Load

Load temperatures will be recorded after a twenty minute period for air cooled systems, and thirty minutes for liquid cooled systems, at 100% load. To obtain this load we will be using AIDA64 Extreme Edition v3.00.2500. This places an even greater load on the CPU than before and includes some benefits. Because the load is so extreme we see the temperature vary wildly from 72C to 86C in some instances. To get an accurate reading we will utilize AIDA64’s ability to average the temperature over time. Given twenty/thirty minutes at 100% load we arrive at a temperature that accurately represents our heatsink’s performance.

Sound

Sound levels will be measured with a Reliability Direct AR824 sound meter from a distance of four feet away. With everything turned off and the room completely silent the meter registered a sound level of 38dB(A). This is a very quiet room where a simple pin drop could be heard. All sound measurements are recorded in the very late evening to further reduce any ambient noise.